Reports & printing

Print a diagnostic report

Open a diagnostic report’s print-formatted page, verify its content and print the result.

Current source · source reviewed · 3 min read

Before you begin

A user entered the diagnostic report in MANSOQ, and you print that report.
You are a member of the facility that holds the report.
You have the permissions listed below.

1. Open the diagnostic report

Open the detail view of the diagnostic report. You can also start from the report's entry in the diagnostic reports list.

2. Open the print-formatted version

Select the print action for the report. MANSOQ opens the print-formatted version of the report.

3. Check the report content

Check the print-formatted version before you print it. The print-formatted version shows the following content:

Content	What it shows
Category	The category of the diagnostic report.
Code	The code of the diagnostic report.
Conclusion	The clinical conclusion for the report.
Note	The notes recorded on the report.
Results	The table of observation results for the report.
Requester	The user who requested the report.

4. Print the report

Print the print-formatted version with the print command of your browser.

Permissions

Permission	Access
Can Read Diagnostic Report	Lets you open a diagnostic report and its print-formatted version. Facility Admin, Administrator, Admin, Staff, Doctor, Nurse, and Volunteer hold this permission.

Expected Outcome

MANSOQ shows the print-formatted version of the diagnostic report.
The printed report shows the category, code, conclusion, note, observation results, and the requester.

Version and configuration

These steps are grounded in the version 3.1 user guide and current source anchors. Available actions depend on your facility setup, roles, active catalogue records and deployment configuration. Source references identify the documented revision; live screenshots and site-specific SOPs still require instance-level validation.

Source evidence

References are pinned to the private MANSOQ source repository. Repository access is required to open these links.