MANSOQ Patient administration
Mark a patient as deceased
This flow describes how to record that a patient is deceased. You record the status and the date and time of death from the patient's profile. Pre-requisites - The patient is registered in MANSOQ. - You can open the patient's profile. - You…
3.1 · versioned documentation · 2 min read
Overview
This flow describes how to record that a patient is deceased. You record the status and the date and time of death from the patient's profile.
Pre-requisites
- The patient is registered in MANSOQ.
- You can open the patient's profile.
- You have the permission listed below.
Permissions
| Permission | Access |
|---|---|
| Can Update a Patient's data | Lets you change the patient's details, and mark the patient as deceased. |
Steps
1. Open the patient's profile
Open the profile of the patient. See View a patient's profile.
2. Edit the additional details
Find the Additional Details section. Select Edit.
3. Mark the patient as deceased
Select the Patient is deceased checkbox. MANSOQ shows a field for the date and time of death.
4. Enter the date and time of death
Enter the date and time of death.
Note: The date and time of death must not be in the future.
Note: The date and time of death must not be earlier than the patient's date of birth. If the patient has an age instead of a date of birth, MANSOQ compares the date of death with the birth year that it calculates from the age.
5. Save the change
Save the Additional Details section. See Update patient details.
Expected Outcome
- The patient's profile shows the deceased status as "Passed away on
{date}, at{time}".
Related
Concepts:
Flows:
Source evidence
References are pinned to the private MANSOQ source repository. Repository access is required to open these links.